Точка доступа на OpenBSD4.6
Добрый день.
Помогите, пожалуйста, разобраться с настройкой точки доступа.
Вводные данные:
OpenBSD4.6, три сетевые карты: 1 - rl1 - подключена к провайдеру (pppoe), rl0 - внутренняя сеть 192.168.х.х, ral0 - беспроводная карта, на которой бы хотелось поднять точку доступа 10.50.х.х...
# cat /etc/hostname.ral0
inet 10.50.0.1 255.255.255.0 NONE media autoselect description "wap" mediaopt hostap mode 11g nwid "wap" wpa wpaprotos wpa2 wpapsk `wpa-psk nwid my_key` chan 3
dhcp-сервер слушает rl0 и ral0:
_dhcp 32074 0.0 0.3 608 772 ?? Is 12:23PM 0:00.00 /usr/sbin/dhcpd rl0 ral0
Точка доступа "wap" видна, но при этом подключиться не могу, ни по DHCP, ни при указании сетевых настроек (IP, netmask).
По меди DHCP отрабатывает.
Помогите разобраться с настройками AP.
Спасибо.
pf.conf: block in
pf.conf: block in all???
tcpdump -n -i ral0 - any traffic ???
pf.conf -- block log
pf.conf -- block log all
tcpdump -n -i ral0 -- ничего
pass on ral0 all keep state
pass on ral0 all keep state - to begin with. :)
pfctl -sr pass on ral0 all
pfctl -sr
pass on ral0 all flags S/SA keep state
...
I had this rule in ruleset. After replace this rule on top I had no changes =(
/var/log/hostapd.log:
Feb 3 17:41:01 ogw hostapd[6334]: ral0/ral0: sent ADD notification for 00:21:91:82:57:9c
Feb 3 18:00:33 ogw hostapd[6334]: ral0/ral0: sent ADD notification for 00:1d:d9:56:60:0a
Feb 4 12:23:59 ogw hostapd[22263]: ral0/ral0: attached Host AP interface with BSSID 00:21:91:82:4c:d1
Feb 4 12:23:59 ogw hostapd[22263]: starting hostapd with pid 22263
00:21:91:82:57:9c -- host that need to get IP-address from AP
А зачем у тебя
А зачем у тебя поднят hostapd? у тебя две точки и нужен roaming?
прибей hostapd и начни с basics.
Все так же
Я и начинал с basics, но и так не мог подключиться. Вот лог на клиенте:
Feb 9 12:36:52 dll kernel: [ 2069.128845] wlan0: authenticate with AP 00:21:91:82:4c:d1
Feb 9 12:36:52 dll kernel: [ 2069.136421] wlan0: authenticate with AP 00:21:91:82:4c:d1
Feb 9 12:36:52 dll kernel: [ 2069.140846] wlan0: authenticated
Feb 9 12:36:52 dll kernel: [ 2069.140855] wlan0: associate with AP 00:21:91:82:4c:d1
Feb 9 12:36:52 dll kernel: [ 2069.142816] wlan0: RX AssocResp from 00:21:91:82:4c:d1 (capab=0x31 status=0 aid=1)
Feb 9 12:36:52 dll kernel: [ 2069.142821] wlan0: associated
Feb 9 12:36:52 dll kernel: [ 2069.143575] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Feb 9 12:36:53 dll kernel: [ 2069.433767] wlan0: deauthenticated
Feb 9 12:36:54 dll kernel: [ 2070.432136] wlan0: direct probe to AP 00:21:91:82:4c:d1 try 1
Feb 9 12:36:54 dll kernel: [ 2070.441423] wlan0 direct probe responded
Feb 9 12:36:54 dll kernel: [ 2070.441433] wlan0: authenticate with AP 00:21:91:82:4c:d1
Feb 9 12:36:54 dll kernel: [ 2070.443746] wlan0: authenticated
Feb 9 12:36:54 dll kernel: [ 2070.443754] wlan0: associate with AP 00:21:91:82:4c:d1
Feb 9 12:36:54 dll kernel: [ 2070.445875] wlan0: RX ReassocResp from 00:21:91:82:4c:d1 (capab=0x31 status=0 aid=1)
Feb 9 12:36:54 dll kernel: [ 2070.445881] wlan0: associated
Feb 9 12:36:55 dll kernel: [ 2071.969674] wlan0: deauthenticated
Feb 9 12:36:56 dll kernel: [ 2072.968166] wlan0: direct probe to AP 00:21:91:82:4c:d1 try 1
Feb 9 12:36:56 dll kernel: [ 2072.994709] wlan0 direct probe responded
Feb 9 12:36:56 dll kernel: [ 2072.994719] wlan0: authenticate with AP 00:21:91:82:4c:d1
Feb 9 12:36:56 dll kernel: [ 2072.998148] wlan0: authenticated
Feb 9 12:36:56 dll kernel: [ 2072.998157] wlan0: associate with AP 00:21:91:82:4c:d1
Feb 9 12:36:56 dll kernel: [ 2073.000335] wlan0: RX ReassocResp from 00:21:91:82:4c:d1 (capab=0x31 status=0 aid=1)
Feb 9 12:36:56 dll kernel: [ 2073.000340] wlan0: associated
Feb 9 12:36:58 dll kernel: [ 2074.530502] wlan0: deauthenticated
Feb 9 12:36:59 dll kernel: [ 2075.528170] wlan0: direct probe to AP 00:21:91:82:4c:d1 try 1
Feb 9 12:36:59 dll kernel: [ 2075.554654] wlan0 direct probe responded
Feb 9 12:36:59 dll kernel: [ 2075.554663] wlan0: authenticate with AP 00:21:91:82:4c:d1
Feb 9 12:36:59 dll kernel: [ 2075.558164] wlan0: authenticated
Feb 9 12:36:59 dll kernel: [ 2075.558172] wlan0: associate with AP 00:21:91:82:4c:d1
Feb 9 12:36:59 dll kernel: [ 2075.560665] wlan0: RX ReassocResp from 00:21:91:82:4c:d1 (capab=0x31 status=0 aid=1)
Feb 9 12:36:59 dll kernel: [ 2075.560670] wlan0: associated
Feb 9 12:37:03 dll kernel: [ 2079.424131] wlan0: no IPv6 routers present
Feb 9 12:37:09 dll kernel: [ 2085.563234] wlan0: disassociating by local choice (reason=3)
Feb 9 12:37:10 dll kernel: [ 2087.068999] wlan0: direct probe to AP 00:21:91:82:4c:d1 try 1
Feb 9 12:37:10 dll kernel: [ 2087.070695] wlan0: direct probe to AP 00:21:91:82:4c:d1 try 1
Feb 9 12:37:10 dll kernel: [ 2087.072833] wlan0 direct probe responded
На сервере при ifconfig ral0 выдает практически то же самое:
authenticate, authenticated, associated, deauthenticate...
мои настройки сетевой
# cat /etc/hostname.ral0
inet 192.168.0.1 255.255.255.0 NONE media autoselect mediaopt hostap mode 11b \
nwid my_net \
wpa wpapsk (тут заранее сгенерированный ключ при помощи wpa-psk my_net my_passphrase без скобок) \
chan 11
все работает
Спасибо
Спасибо всем. Все заработало.